COOLOUS C60S Universal HUD Heads UP Display Digital Speedometer LED Screen Speed Projector Windshield Projection Film Over Speedo Alarm for Cars & Other Vehicles
(as of Apr 25,2021 05:16:52 UTC – Details)
Head-up display – projects the driving speed on the windscreen.Stand-up display – shows the driving speed on the LED screen.Easy Setup-Plug & Play- Power through vehicle cigarette lighter. No professional installation is required.Compatible with all Cars & Trucks. Use GPS signal guided calculation. No wiring needed to the VSS (vehicle speed signal).Display MPH or KM/H.Driving time and mileage calculation display.Auto adjusts brightness through sensor for Day & Night driving.Green color speed display, easy on your eye.Over-speed Alarm, and On/Off.
COOLOUS HUD uses GPS to determine the true speed of the vehicle. There are several reasons why there may be a difference between the speed displayed on the car’s speedometer and the HUD. These include:
• Calibration set by vehicle manufacturers to read high to ensure their speedometers never indicate a lower speed than the actual speed of the vehicle.
• Speedometer inaccuracy due to aftermarket modifications such as different tire and wheel sizes or different differential gearing.
How to Use
Just connect the device to the USB cable,plug it to the car USB port. If no USB port on the car, then buy a car adaptor for it, or plug it to a power bank.Suitable for any vehicle, power the device with power bank
Set the Speedometer Unit (KM or Mile)
Long press the Enter button, if you see number 100 shown on the screen, which means KM/hLong press the Enter button, if you see number 161 shown on the screen, which means MPHThe default speed meter unit is set as KM/h
Set the Over-Speed Alarm Rate
Press the Up Button or Down Button to increase or decrease the speed rateThe default alarm speed rate is 120KM/hA three times “Beep” sound alarm will be triggered when over speed occurs.No more alarm will be triggered when over-speed is detected continuously.
Adjustable Speed Slightly
The display speed could be adjusted by hand. Press and hold the up button and Enter button at the same time. It will show the numbers from 650 to 669.
Default speed rate is 665, if you want to increase the display speed with 1KM/H, adjust rate to 666; And if you want to decrease it with 1KM/H, adjust rate to 664
Fatigue Driving Alarm
In every hour, system will trigger a fatigue driving alarm with continuous driving time displayed, in order to remind driver to avoid drowsy-driving.
001 means one-hour continuous driving,
002 means two-hour continuous driving and so on.
Keep your eyes on the road：
At 65 mph, looking down for one second to check the speedometer means driving blind for 95 feet. Many accidents start during the time a driver glances down and fails to see sudden traffic changes ahead. Drive safely by never looking down to check speed.
Over speed alert：
Fatigue driving alarm：
【What’s GPS Speedometers?】Collecting speed from GPS satellites. No relation with the car engine, therefore, it’s 100% universal for all vehicles include car, truck, pick-up, suv, scooter, train, motorcycle, bike, boat..
【What does the GPS HUD display?】Driving Speed, Single Driving Time and Mileage. Single Driving Mileage is the mileage from ACC is on to ACC is off. If you want total Driving Mileage – Odometer, please choose model C80 or C90.
【What’s the speed unit?】KM/H and MPH. Long press the Enter Button, if you see number 100 shown on the screen, which means the speed unit is KM/h, if you see number 161 shown on the screen, which means the speed unit is MPH.
【What other functions?】Over-speed alert. Default setting alert value is 120. Adjust the over-speed setting, once over value, it will give a warning. If want to off speed warning, just adjust the over-speed value to a very impossible high value.